How to Calibrate iPhone Screen

How to Calibrate iPhone Screen
How to Calibrate iPhone Screen

Have you ever tried to calibrate an iPhone Screen? But you failed because you could not calibrate the touch screen’s sensitivity. Instead, you may readjust the motion sensors and the auto-screen Brightness and calibrate the battery. Let’s check out the following 3 simple ways that describe How to calibrate iPhone Screen.

Way to calibrate iPhone Motion Sensors & Compass

The apps in your iPhone use motion sensors, accelerometers, and compasses. And if any of them stop working smoothly, the iPhone recalibrates the app automatically until the location services are powered on. Here is the instruction to make sure that your device is coping with this for you:

  • Go to Settings on your iPhone.
  • Switch on the toggle of Location Services, then scroll down to tap System Services.
  • Then you must turn on the Compass Calibration and Motion Calibration & Distance toggle buttons.
  • Your iPhone utilizes your location data to ensure the gyroscope, GPS, and compass. And the accelerometer begins to work appropriately.

Way to Calibrate iPhone Screen Brightness

When you notice your iPhone auto-brightness sensor responds inefficiently to changes in lighting. The problem may occur due to the auto-brightness adjustment partly based on the value set when the feature was switched on.

Follow the steps to recalibrate the auto-brightness sensor.

  • Launch the Settings app, scroll down, and select the Accessibility option.
  • Choose Display & text Size, then turn off the Auto-Brightness button. Head towards to dark or dimly lit room. Later you have to turn the Brightness down manually, so the screen looks as dark as possible.
  • Turn on the Auto-Brightness toggle, and move in a room with regular lighting to see if the auto-brightness performs its job better now.

Way to Calibrate the iPhone Battery

If your iPhone battery shows incorrect percentages, that indicates the battery needs to be calibrated. The phone may also show a low percentage, yet it lasts an hour or two longer. Possibly, it also displays full battery but suddenly shuts down. Now you need to readjust the iPhone battery to fix the screen and report the percentage of the rest of the battery.

  1. Use your phone till the battery ends and it gets shut off.
  2. Put aside your phone discharge and unplugged for a night just to let it completely drain the battery.
  3. When the phone is powered down, recharge it for at least 2 hours or longer than is needed to catch it with 100 percent capacity.
  4. Start the phone and do the soft reset, also called a warm reset. This method of doing the soft reset varies with iPhone models.

If you’re iPhone 7 or iPhone plus user, hold the volume button down and the sleep/wake button for about 10 seconds. And for iPhone X, 8, and 8 plus user should press and release the volume up button, press and release the volume down button, and then press the hold the slide button until the Apple logo is visible on the screen. When resetting the phone is done, it must show an accurate battery status of your phone.

Consequently, with these three different ways, you may calibrate iPhone Screen. Hopefully, you find this information valuable for calibrating your iPhone issues.